Flowserve 051 000 Series Bedienungsanleitung PDF herunterladen

Flow Control

Kämmer Control Valves

Installation, Operation, Maintenance Instructions

Tank Flush Valve

Series 051 000, without bellows seal

KMEIM5100-00 02.05

USING KÄMMER VALVES AND ACTUATORS CORRECTLY

1.1 General

The following instructions are designed to assist in

unpacking, installing and performing maintenance as

required on Kämmer products. Product users and

maintenance personnel should thoroughly review this

bulletin prior to installing, operating or performing any

maintenance.

DANGER: In most cases Kämmer valves and actuators

are designed for speciﬁc applications (e.g. with regard

to medium, pressure, temperature). For this reason

they should not be used in other applications without

ﬁrst contacting the manufacturer.

1.2 Terms concerning safety

The safety terms DANGER, WARNING, CAUTION

and NOTE are used in these instructions to highlight

particular dangers and/or to provide additional

information on aspects that may not be readily

apparent.

DANGER: indicates that death, severe personal injury

and/or substantial property damage will occur if proper

precautions are not taken.

WARNING: indicates that death, severe personal injury

and/or substantial property damage can occur if proper

precautions are not taken.

CAUTION: indicates that minor personal injury and/or

property damage can occur if proper precautions are

not taken.

NOTE: indicates and provides additional technical

information, which may not be very obvious even

to qualified personnel. Compliance with other,

not particularly emphasised notes, with regard to

transport, assembly, operation and maintenance and

with regard to technical documentation (e.g. in the

operating instruction, product documentation or on

the product itself) is essential, in order to avoid faults,

which in themselves might directly or indirectly cause

severe personal injury or property damage.

1.3 Protective clothing

Kämmer products are often used in problematic

applications (e.g. extremely high pressures, dang-

erous, toxic or corrosive mediums). In particular

valves with bellows seals point to such applications.

When performing service, inspection or repair

operations always ensure, that the valve and actuator

are depressurised and that the valve has been cleaned

and is free from harmful substances. In such cases pay

particular attention to personal protection (protective

clothing, gloves, glasses etc.).

1.4 Qualiﬁed personnel

Qualiﬁed personnel are people who, on account of

their training, experience and instruction and their

knowledge of relevant standards, specifications,

accident prevention regulations and operating

conditions, have been authorised by those responsible

for the safety of the plant to perform the necessary

work and who can recognise and avoid possible

dangers.

1.5 Installation

DANGER: Before installation check the order-no,

serial-no. and/or the tag-no. to ensure that the valve/

actuator is correct for the intended application.

Do not insulate extensions that are provided for hot

or cold services.

Pipelines must be correctly aligned to ensure that the

valve is not ﬁtted under tension.

STOP!

Index

1 Using Kämmer valves and actuators correctly.

2 Unpacking

3 Installation

4 Quick check

5 Maintenance

6 Remove and install actuator

7 Disassemble and assemble valve

8 Trouble-shooting chart

1 2 3 4 5 6 7 8

Inhaltsverzeichnis

Seite 1 - Tank Flush Valve

1Flow ControlKämmer Control Valves®Installation, Operation, Maintenance InstructionsTank Flush Valve Series 051 000, without bellows seal KMEIM5100

Seite 2 - Kämmer Control Valves

2Flow ControlKämmer Control Valves®2 UNPACKING2.1 Each delivery includes a packing slip. When unpacking, check all delivered valves and accessories

Seite 3

3Flow ControlKämmer Control Valves®4 QUICK CHECK: Before operating, check the valve as follows:4.1 Open and close the valve, and observe the move

Seite 4

4Flow ControlKämmer Control Valves®CouplingCoupling screwsCoupling insertLocknutYoke plateYoke nutsActuator series 2Fig. 1aZero adjustment locknutActu

Seite 5

5Flow ControlKämmer Control Valves®6 REMOVE AND INSTALL ACTUATOR General Information We recommend separating the actuator from the valve during all

Seite 6

6Flow ControlKämmer Control Valves®Fig. 2Stem/plugSeat ringGasketValve bodyBushingPackingSlotted nutGland nutLocknutDrip protection

Seite 7

7Flow ControlKämmer Control Valves®6.4.3 Unscrew the coupling insert until the yoke rods are raised from the lower yoke plate by around 2 mm. NOTE:

Seite 8 - 8 Trouble-shooting Chart

8Flow ControlKämmer Control Valves®8 Trouble-shooting ChartAll data subject to change without notice©09.2003 Flowserve Corporation. Flowserve and Kä

Verwandte Modelle: 011000 Series Angle Valves | 015 000 Series Angle Valves | 041 000 Series | 185000 Series Low Flow Valves | 285000 Series Low Flow Valves |

Kommentare zu diesen Handbüchern

Keine Kommentare

Flowserve 051 000 Series Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Hardware Flowserve 051 000 Series herunter. Flowserve 051 000 Series User Manual Benutzerhandbuch

Inhaltsverzeichnis

Verwandte Modelle: 011000 Series Angle Valves | 015 000 Series Angle Valves | 041 000 Series | 185000 Series Low Flow Valves | 285000 Series Low Flow Valves |

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Flowserve 051 000 Series