Flowserve 90 Series Modular Accessory System Bedienungsanleitung PDF herunterladen (Seite 7)

07334-F Modular Accessory System (Series 90) 7

3. Troubleshooting

Problem Possible Cause Solution

Shaft binds Cover not Loosen cover screws

centered and allow cover to

center on shaft.

Retighten cover screws.

Inadequate Remove cover and

lubrication lubricate shaft hole with

bearing grease, such as

Cindol 2321. If excessive

wear or galling is

present, shaft and

affected part of housing.

Flow Control Division

Worcester Controls

1 2 3 4 5 6 7 8

Keine Kommentare

Flowserve 90 Series Modular Accessory System Bedienungsanleitung Seite 7