Flowserve CPM Series Bedienungsanleitung

Installation InstructionsExperience In MotionCPM SeriesDual, cartridge mounted, flexible stator pusher seal designed for general service applicationsCP

104 Operational Recommendations4.1 Do not exceed corrosion limits. The CPM PP seal is designed to resist corrosion by most chemicals. However, do n

115 RepairThis product is a precision sealing device. The design and dimension tolerances are critical to seal performance. Only parts supplied by Flo

TO REORDER REFER TOB/M #F.O.FIS165eng REV 01/09 Printed in USAflowserve.comTo find your local Flowserve representativeand find out more about Flowserve C

2DescriptionThe CPM PP seal is a cartridge mounted mechanical seal, designed for ease of installation and reliable operation. No seal setting dimensio

3Seal Chamber Requirements Figure 11.5 Check equipment dimensions to ensure that they are within the

4CPM PP Dimensional Data (inches) for standard bore seal chambers Figure 2ADCG KFJ19 15 14

1.375 2.000 2.385 2.625 4.000 2.008 2.070 2.146 2.208 3.212 0.531 1.750 2.500 2.760 3.000 5.500 2.008 2.070 2.146 2.208 3.587 0

62 CPM PP InstallationNote: No seal setting measurements are needed to install the CPM PP seal. Instructions are for vertically split case end-sucti

7 2.5 Position the CPM PP with the gland tight against the seal chamber face. Turn the gland so that the barrier taps are positioned so that the as

8 Inlet Outlet Clockwise (CW) Port c Port b Counterclockwise (CCW) Port b Port c Shaft rotation from exposed end of gland

93.3 For dual seal un-pressurized operation, supply a clean compatible buffer uid to the inlet port at a pressure below the stufng box pressure. See