Flowserve MX Dashboard Limitorque Bedienungsanleitung PDF herunterladen (Seite 7)

FCD LMENIM2338-01

This document is designed to demonstrate the capabilities

of the Bluetooth link for communication with the MX/QX. IR

communication is identical except for the initial selection of the

IR/COM link. From this point forward, the BT link shall be used

as a reference.

The link is established per the following procedure:

•VerifytheMX/QXisconfiguredfortheBTportoption.

•RecordtheMX/QXpassword.

•UsingtheDashboardapplication,performthefollowing:

- Select the “Bluetooth” button.

The Dashboard application will scan for all BT devices in range.

NOTE: The application will identify all BT devices in range

including and not limited to cell phones and PCs.

Note: The FLXMX/QX refers to the MX/QX actuator.

•Ifthedesiredactuatordoesnotappearinthescanwindow,

move closer to the actuator and press the “Rescan” button.

If the actuator still does not appear in the scan window,

verify the MX/QX actuator in question.

•Selectthedesiredactuatorwiththemousecursor(PC

application) or stylus (PDA application) and wait for

the “ACCEPT” button to activate.

NOTE: If the MX/QX is configured for password protection, enter

the password in the Dashboard input field when prompted.

Proceed to page 9.

Creating the Dashboard BT Link

1 2 3 4 5 6 7 8 9 10 11 12 ... 27 28

Keine Kommentare

Flowserve MX Dashboard Limitorque Bedienungsanleitung Seite 7