
Excessive valve seat leakage
• damaged sealing edges at
valve seat or plug
• foreign particles in seat area
• plug does not close fully
• contact customer services
department or contract partner
• contact customer services
department or contract partner
• refer to 3.1 to 3.5
Leaking stuffing box system
• compression force on packing
too low
• worn packing
• dirty spindle
• damaged spindle
• slightly re-tighten stuffing box packing
Caution: make sure the valve spindles
can still move !
• slightly re-tighten stuffing box packing
Caution: make sure the valve spindles
can still move !
• if the packing does not stop leaking,
contact customer service department
or contract partner
• clean spindle with suitable cleaning
agent
• contact customer services
department or contract partner
• pressing force on seal(s) too
low
• seal(s) defective
• properly re-tighten top or lid nuts
crosswise
• contact customer services
department or contract partner
• medium or flow related damage
• contact customer service department
or contract partner
• power supply to limit switch
interrupted
• limit switch misadjusted
•
check power supply
( voltage, circuit
breakers, connections )
• readjust limit switch; operating
distance see limit switch data sheet
• see maintenance and operating in
structions of positioner manufacturer
If the problem is not solved by taking the above measures, contact the customer services
department or contract partner.
Kommentare zu diesen Handbüchern