Flowserve WDX Bedienungsanleitung PDF herunterladen (Seite 34)

WDX USER INSTRUCTIONS ENGLISH 71576322 06-05

Page 34 of 46

6.8.3 Dismantling radial bearing

6.8.3.1 Antifriction bearings (WDXR and WDXC)

Grease lubricated

Oil lubricated

Remove the four cap screws of the bearing cover

[6577-03].

Remove the bearing cover [3263].

Straighten tab on bearing lock washer [6541-03] and

unscrew bearing lock nut [3712-03].

Remove the coupling spacer piece [2460-03].

Remove the eight cap screws of the bearing housing

[6577-04].

The whole line bearing assembly can then be

removed.

6.8.3.2 Line bearings (WDXE)

Free the bearing by removing screw [6570-02].

Remove the bearing bushing [3300] by means of a

disassembling screw M10.

Remove the snap ring [6544-03] and slide off the

shaft sleeve [3400-01].

6.8.3.3 Line bearings (WDXS)

Unscrew the bearing cap screws [6577-04].

Remove the bushing cover [3260].

Remove the snap ring [6544-01] and slide off the

shaft sleeve [3400-01].

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 45 46

Keine Kommentare

Flowserve WDX Bedienungsanleitung Seite 34