Flowserve TRG5-53 Bedienungsanleitung PDF herunterladen (Seite 10)

Tools

■ Open-end spanner (A.F. 22 mm or A.F. 27 mm)

■ Torque spanner (A. F. 22 mm or A. F. 27 mm)

Installation

TRG 5-53, TRG 5-54

1. Clean sealing surfaces.

2. Put gasket 13x 26 onto the sealing surface (choose the material of the gasket

according to the respective application).

3. Screw in temperature sensor and tighten with spanner when cold (torque 50 Nm).

TRG 5-55, TRG 5-56, TRG-5-57, TRG 5-58

1. Remove socket-weld end from temperature sensor.

2. Clean welding surfaces.

3. Arc-weld trap manually (welding process 111 complying to DIN EN 24063) or use

gas-welding process (welding process 3 complying to DIN EN 24063).

4. After welds have cooled down screw in temperature sensor and tighten with

spanner when cold.

Note

■ To install the temperature sensor in a pipe, weld knee bend to the pipe

such that the measuring tip is immersed in the fluid against the

direction of flow. Fig. 8, Fig. 9

■ Make sure that the measuring tip of the installed temperature sensor is

always in contact with the fluid. Fig. 3, Fig. 4

■ The temperature sensors must not be completely insulated. For more

details see examples of installation Fig. 6, Fig. 7

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Keine Kommentare

Flowserve TRG5-53 Bedienungsanleitung Seite 10