Flowserve DDC-100 Master Station II Bedienungsanleitung PDF herunterladen (Seite 45)

FCD LMAIM5001-00 DDC-100 Master Station II Installation and Operation Manual 45

Flow Control Division

Limitorque Actuation Systems

8 Ethernet Port Configuration

The Master Station includes support for several TCP/IP protocols, including Modbus Ethernet and HTTP (web server).

Each Master Station processing unit must be configured with a unique IP address, mask, gateway, and Hot Standby IP

Address if Hot Standby is installed (Figure 8-1). The Hot Standby IP Address is discussed in detail in Chapter 10.

Note: If Hot Standby is not installed, the Hot Standby IP Address must be 0.0.0.0.

Figure 8-1: The Configure Ethernet Port screen

Touching the “Edit” button for each row will allow the user to edit the octets of the addresses, one octet at a time, from

left to right (Figures 8-2, 8-3, 8-4, 8-5).

Use the “Next” and “Back” buttons on each editing screen to navigate between screens.

Figure 8-2: Edit Octet One screen

<< Back

IP Address 1

Current Value:

192

1-255

Valid Range:

1st octet of

IP Address for

this CPU

### ___ ___ ___

192

CLR

DEL

Next >>

EDIT

<< Back Top Screen

IP Address

192 168 0 100

Mask

255 255 255 0

Gateway

192 168 0 1

Hot Standby IP Address

0 0 0 0

Configure Ethernet Port

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 87 88

Keine Kommentare

Flowserve DDC-100 Master Station II Bedienungsanleitung Seite 45