Flowserve Swing Check Valves 2.5-24 Bedienungsanleitung PDF herunterladen (Seite 26)

Swing Check Valves FCD ADENIM0013-00

6.0 ASSEMBLY

(Continued)

6.1.1.2.3 Pin Mounted on Bracket in Body (Fig 15)

With the hinge assembly supported, the hinge support (007) should be placed over

the hinge end and the hinge pin (041) (with the retaining pin (257) in place) inserted

into position. Prior to installing the assembly in the body, position the two spring

pins (258) on the pads in the body. The assembly can now be lowered over the

pins into position on the pads. Put a washer (Tab Lock) (251) on each hinge support

bolt (289), insert them through the hinge support bracket into the body and tighten.

Once they are in place, the tabs on the lock washer should be bent over.

FIGURE 15

1 2 ... 21 22 23 24 25 26 27 28 29 30

Keine Kommentare

Flowserve Swing Check Valves 2.5-24 Bedienungsanleitung Seite 26