Flowserve BUSwitch Bedienungsanleitung PDF herunterladen (Seite 16)

AXAIM020-01 (AUTO-48) 3/03 Page 16 of 16

BUSwitch

™

with FOUNDATION

Fieldbus Protocol

Installation, Operating and Maintenance Instructions

Flowserve Corporation 1350 N. Mountain Springs Parkway 1978 Foreman Dr.

Flow Control Division Springville, Utah 84663-3004 Cookeville, TN 38501

www.flowserve.com Phone: 801 489 8611 Phone: 931 432 4021

18 CHANNEL 1 for

DI-1

2 for

DI-2

The number of the logical hardware channel that is connected to this I/O

block. This information defines the transducer to be used going to or from the

physical world.

19 FSTATE_TIM

The time in seconds from detection of fault of the output block remote setpoint

to the output action of the block output if the condition still exists

20 FSTATE_VAL

The preset discrete SP_D value to use when fault occurs. This value will be

used if the I/O option Fault State to value is selected

21 BKCAL_OUT_

The output value and status provided to an upstream discrete block. This

information is used to provide bumpless transfer to closed loop control.

22 RCAS_IN_D Target setpoint and status provided by a supervisory Host to a discrete

control or output block.

23 SHED

OPT *** Defines action to be taken on remote control device timeout.

24 RCAS_OUT_

Block setpoint and status provided to a supervisory Host for back calculation

and to allow action to be taken under limiting conditions or mode c

hange.

25 UPDATE

EVT This alert is generated by any change to the static data

26 BLOCK_ALM The block alarm is used for all configuration, hardware, and connection failure

or system problems in the block. The cause of the alert is entered in the

subcode field. The first alert to become active will set the Active status in the

Status attribute. As soon as the Unreported status is cleared by the alert

reporting task, another block alert may be reported without clearing the Active

status, if the subcode has chang

ed.

*** = NormalShed_NormalReturn

0518 II 2 G EEx d II T5

1 2 ... 11 12 13 14 15 16

Kommentare zu diesen Handbüchern

Keine Kommentare

Flowserve BUSwitch Bedienungsanleitung Seite 16

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Flowserve BUSwitch