Flowserve BK 15 Bedienungsanleitung PDF herunterladen (Seite 13)

Maintenance – continued –

WINIX

2150 is a registered trademark of WINIX GmbH, Norderstedt

1. Take notice of note “Danger” on page 6.

2. Undo hexagon bolts . Remove cover from the body .

3. Remove regulator .

4. Remove and clean strainer .

5. Clean body, internals and all gasket surfaces.

6. Apply heat-resistant lubricant to all threads and the seating surface of the nozzle

insert and the cover (use for instance WINIX

2150).

7. Insert strainer .

8. Screw in regulator and tighten with a torque of 140 Nm.

9. Insert new gasket .

10. Place cover onto the body. Tighten hexagon bolts alternately and in several

steps to a torque of 45 Nm.

Clean/Replace Strainer

N D K

■

Spanner A. F. 18 mm to DIN 3113, form B

■

Torque spanner 20 – 160 Nm to DIN ISO 6789

Tools

Torques

Item Designation Torque [Nm]

Regulator 140

Hexagon bolts 45

Union nuts 30

All torques given in the table are based at a room temperature of 20 °C. Threads without lubricant.

1 2 ... 8 9 10 11 12 13 14 15 16

Keine Kommentare

Flowserve BK 15 Bedienungsanleitung Seite 13