Flowserve Circpac HP Bedienungsanleitung PDF herunterladen

Inhaltsverzeichnis

Installation InstructionsCircpac HPExperience In MotionSegmented Circumferential Gas Seal for Gas Compressors

21 Precautions 1.1 Please read these instructions carefully. Installation in accordance with the following instructions will contribute to l

Seite 3 - 3 Equipment Check

3 2.5.3 Minimum runout between the shaft and equipment housing. 2.5.4 Prevention of product sedimentation on the housing, shaft or

Seite 4 - 4 Seal Installation

3.11 Seal chamber squareness to the shaft center line should be within 0.013 mm per 25.4 mm (0.0005 inch per 1 inch) shaft diameter. Note:

Seite 5 - 5 Piping and Control System

4.10 Disengage setting plates and store separately. 4.11 Inspect equipment and driver alignment in accordance with coupling and/or equipme

Seite 6

 5.3 Sizepipingsystemforrequiredowrates.Minimizerestrictionsand  determine total pressure drop(s) through piping system to ensure

Seite 7 - 8 Repairs and Guarantee

7 Off-SitePerformanceTesting 7.1 Equipment manufacturers will often execute performance tests with   theCircpacHPinstalledonneworretr

Seite 8 - TO REORDER REFER TO

TO REORDER REFER TOB/M #F.O.To nd your local Flowserve representativeand ﬁnd out more about Flowserve Corporation, visit www.ﬂowserve.comFIS174eng OR

Kommentare zu diesen Handbüchern

Keine Kommentare

Flowserve Circpac HP Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Hardware Flowserve Circpac HP herunter. Flowserve Circpac HP User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Flowserve Circpac HP