Flowserve NRGS 16-1 Bedienungsanleitung PDF herunterladen (Seite 14)

1. Switch on mains supply and check the correct functioning of the equipment at the

corresponding switchpoints. LEDs , , and are provided for visual check

of switchpoints. Fig. 7

Remove housing cover to check LEDs , , and . See “Wiring”

Commissioning

Warning

1. Check whether the system NRGS 16-1, NRGS 16-1S has been wired according

to wiring diagram Fig. 8.

2. Check whether mains supply corresponds to the wiring carried out on the

equipment.

The terminal strip of the NRGS 16-1/ NRGS 16-1S is live during operation.

This presents the danger of electric shock.

Cut off power supply before removing or replacing housing cover.

Wiring check

Application of mains voltage

1. Check whether the designated switchpoints – i. e. switch functions – have been

correlated with the individual electrode rods. See table 1.

Check correlation of switching functions

1 2 ... 9 10 11 12 13 14 15 16 17 18

Keine Kommentare

Flowserve NRGS 16-1 Bedienungsanleitung Seite 14