Flowserve PMV D3 Digital Positioner Bedienungsanleitung Seite 42

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 60
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 41
42
• Tighten the screws F, on the cam assembly.
Do not tighten the screws to hard. The cams
should be able to move in relation to each
other.
• Install the inner cover with the two screws,
G.
• Connect the wiring for the transmitter feed-
back on the terminal block, according to the
drawing on next page.
Adjust the position where the switches/
sensors should be affected, by turning the
cams with a screwdriver.
• Tighten the cam assembly screws F when
the cams are correctly adjusted.
• Install the indicator and cover.
To calibrate the feedback transmitter, see
drawing on next page.
F
G
F
Seitenansicht 41
1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 59 60

Kommentare zu diesen Handbüchern

Keine Kommentare