Flowserve QX Limitorque Bedienungsanleitung PDF herunterladen (Seite 45)

Limitorque QX Electronic Actuator FCD LMENIM3314-00 – 5/11

ﬂowserve.com

4.10.1 Optional Small Baseplate Removal.

Step 1

QX-1 & 2, F/FA-10 and QX-3 thru 5 F/FA-12 and -14. Using a M3 hex key forQX-1 & 2 or M5 hex key for QX-3, 4 & 5,

remove the M4 or M6 screws (#13-7) and remove torque nut (#13-6).

QX-1 & 2, F/FA-05 or -07, QX-3 thru 5 F/FA-10.

Remove small baseplate per Section 4-6-4. Using a M3 hex key, QX-1 & 2 or M5 hex key for QX-3, 4 & 5, remove the

M4 or M6 screws (#13-7) and remove torque nut (#16-7).

4.10.2 Optional Small Baseplate Remounting.

Step 1

NOTE: Torque nut may be mounted in 1 of 4 positions (every 90°) on QX-1 & 2 and 1 of 8 positions (every 45°) on the

QX-3 thru 5. Make sure the torque nut is in the position needed.

Slide torque into drive sleeve aligning pilot and lugs, Place screws in torque nut holes and tighten. Remount baseplate.

4.11 Optional Thrust Base Assembly QX-1 & 2.

Table 4.23 - Optional Thrust Base Assembly

ITEM NUMBER DESCRIPTION QTY.

16-10 TORQUE NUT 1

16-11 BUSHING 1

16-12 O'-RING 1

16-13 O'-RING 1

16-14 ADAPTER PLATE 1

16-15 SOCKET HEAD CAP SCREWS 4

16-16 SPACER, PILOT, ISO ONLY 1

16-17 THRUST BASE ASSEMBLY 1

Figure 4.27 - Optional Thrust Base Assembly QXM Only

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 81 82

Keine Kommentare

Flowserve QX Limitorque Bedienungsanleitung Seite 45