Flowserve QX Limitorque Bedienungsanleitung PDF herunterladen (Seite 46)

Limitorque QX Electronic Actuator FCD LMENIM3314-00 – 5/11

4.11.1 Optional Thrust Base Assembly Removal.

Step 1

Remove the four (4) screws (# ) and remove the thrust base subassembly (#16-17) by sliding the base down. If base

is ISO remove the spacer (pilot) (#16-16).

Step 2

Remove the four (4) screws (# 16-15) and remove the adapter plate (#16-14) and torque nut (#16-10). Item (#16-11)

bushing is pressed into adapter plate and cannot be removed. The torque nut is held in place by the unit drive sleeve

and the bushing (#16-11).

Table 4.24 Optional Thrust Base Subassembly

ITEM NUMBER DESCRIPTION QTY.

10-1 HOUSING, THRUST BASE 1

10-2 PILOT, THRUST BASE 1

10-3 THRUST NUT 1

10-6 SOCKET HEAD CAP SCREWS 1

10-7 FLAT WASHER 1

10-8 RELIEF FITTING 1

10-10 SOCKET HEAD CAP SCREWS 4

10-11 GREASE FITTING 1

10-12 NEEDLE BEARING 2

10-13 THRUST RACE 2

10-14 QUAD RING 1

10-15 O'-RING 1

10-16 QUAD RING 1

Figure 4.28 - Optional Thrust Base Subassembly

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 81 82

Keine Kommentare

Flowserve QX Limitorque Bedienungsanleitung Seite 46