Flowserve QX Limitorque Bedienungsanleitung PDF herunterladen (Seite 61)

Limitorque QX Electronic Actuator FCD LMENIM3314-00 – 5/11

ﬂowserve.com

6.3.3 Control Module Remounting

Step 1

Position the controls module subassembly over the three mounting screw heads (#14-9). Rotate the subassembly in a

clockwise (CW) direction until all three screws are seated in the keyhole slots.

(The keyhole slots in the chassis plate (#1 or 1-1) are spaced in such a way that the control module subassembly will

mount in only one position).

Step 2

Tighten the three screws (#14-9) with a 3mm hex key.

Step 3

Connect wiring (See section 7 for wiring connection). Place retainer (#14-11 or 7) (Optional) on control module

ensuring the long tang sits in-between the Iram heat sink cover (#1-9 or 16) and connector on control module

For AC controls Insert screw (#14-12) in to retainer hole (#14-11) and tighten. For DC controls Insert ﬂat washer (#1)

and standoff (#2) in to retainer hole (#14-11) and tighten. . (See Figure 6.9).

Figure 6.9 - Bracket Connector Retainer Assembly

6.4 Terminal Block

Table 6.9 Terminal Block Assembly

ITEM NUMBER DESCRIPTION QTY.

14-3 O'-RING 1

14-4 TERMINAL BLOCK SUBASSEMBLY 1

14-5 RETAINING RING 1

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 81 82

Keine Kommentare

Flowserve QX Limitorque Bedienungsanleitung Seite 61