Flowserve StarPac II Control Valves Bedienungsanleitung PDF herunterladen (Seite 11)

Status Menu

The STATUS menu is used to view information about the configuration

and operation of the system. Errors and alarms can also be viewed

from this menu. The S

TATUS menu is arranged as shown in Figure 2.

rlm

Row1

Sta-

tus

Row2

Tune Cal-

brat

Con-

lrm

Set

Info

iew

Figure 2: Status Menu

Each option may have other menus or options to choose from.

Row 1 and Row 2 Var - Selects the information that will be

displayed on the first two rows of the display during normal

operation. Each selection has the same list of options except where

noted.

Mode/Status - Lists the operating mode and any current alarm

or trip conditions. (This option is only available on Row One.)

Scanning Display - Rotates automatically through a list that is

configured through the user interface. (This option is only

available on Row Two.)

Valve Position - Current valve position in percent open.

(Designated as “Posn” in the display.)

Valve Command - Current valve command in percent open.

(Designated as “Comnd” in the display.)

Liquid Flow - Current liquid flow rate in user-defined units.

(Designated as “FlowQ” in the display.)

Gas Flow - Current gas flow rate in user-defined units.

(Designated as “FlowW” in the display.)

ISA Up Stream Press - Current compensated upstream line

pressure in user-defined units. (Defined as two pipe diameters

upstream of the valve, designated as “P1isa” in the display.)

ISA Dn Stream Press - Current compensated downstream line

pressure in user-defined units. (Defined as six pipe diameters

downstream of the valve, designated as “P2isa” in the display.)

ISA Delta Pressure - Current differential pressure using the

pressure definitions above in user-defined units. (Designated as

“dPisa” in the display.)

Process Temperature - Current process temperature in user-

defined units. (Designated as “Temp” in the display.)

Liquid Flow Totalizer - Totalized liquid flow in user-defined

units. (Designated as “TotlQ” in the display, the totalizer is reset

from the T

UNE menu.)

Gas Flow Totalizer - Totalized gas flow in user-defined units.

(Designated as “TotlW” in the display, the totalizer is reset from

the T

UNE menu.)

StarPac II User Interface Manual

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 61 62

Kommentare zu diesen Handbüchern

Keine Kommentare

Flowserve StarPac II Control Valves Bedienungsanleitung Seite 11

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Flowserve StarPac II Control Valves