Flowserve ISC1PX Bedienungsanleitung Seite 2

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 8
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 1
1 Nomenclature
2
These instructions are written for trained, experienced technicians familiar with the basic
principles and tools involved in the installation, care and service of mechanical seals and
seal support systems. A complete reading of these instructions by personnel in contact
with the equipment is essential to safety. Incorrect installation, operation or maintenance
can result in personal injury or death to personnel and damage to the equipment.
19 183 1
100
24 40
57.1
103
18 76 2 15 14
13.1
13 16
58
5711
2 Disassembly
Note: Primary seal O-rings (13, 13.1,76) are
all the same size and cross section.
14 Stationary Face
15 Rotating Face
16 Springs
100 Stator Face Support
13 Dynamic (seat gasket)
13.1 Stator (seat gasket)
76 Rotating Face Gasket
18 Gland Gasket
11 Gland Assembly
24 Gland Bushing
103 Setting Device
40 Cap Screw
1 Sleeve Assembly
2 Seal Drive
183 Vibration Dampener
58 Drive Collar
57 Cup Point Set Screw
57.1 Quarter Dog Set Screw
19 Sleeve Gasket
Table 1
Figure 1
When disassembling seal, inspect for conditions which may have caused the
need for the seal to be removed from service. If seal was removed due to
premature failure, determine what conditions caused that failure and correct any
problems prior to returning the repaired seal to service. For assistance with seal
failure analysis, please contact your Flowserve representative.
Seal Parts that are always replaced
Stationary Face 14
Rotating Face 15
Springs 16
Stator Face Support 100
All O-rings 13 , 13.1 , 76 , 19
Gland gasket 18
Vibration dampener 183
Setting Devices 103 and cap screws 40
Cup point and quarter dog set screws 57 and 57.1
Gland Bushing 24
Reconditionable Seal Parts
Gland assembly 11
Sleeve assembly 1
Drive collar 58
Seal Drive 2
Seitenansicht 1
1 2 3 4 5 6 7 8

Kommentare zu diesen Handbüchern

Keine Kommentare