Flowserve ISC2BB Bedienungsanleitung PDF herunterladen (Seite 8)

4.12 Insert the retaining ring RR

into the groove in the sleeve

assembly while pressing

down on the rotor carrier.

Make sure that the retaining

ring snaps completely into

the groove in the sleeve

assembly. (Figure 14)

4.13 Insert the outboard vibration

dampener M into the rotor

carrier. Make sure that the

vibration dampener is fully

seated at the bottom of the

rotor carrier. Place the

outboard bellows O-ring 6

in the O-ring groove of the

rotor carrier, which is behind

the surface with two drive

flats. (Figure 15)

4.14 Repeat steps 4.7 through 4.9

to assemble the outboard

bellows assembly 34 into

the sleeve/rotor carrier

assembly.

Assemble the outboard

mating ring O-ring P and

the outboard bellows

vibration dampener M2

into the gland assembly 1 .

(Figure 16)

Figure 14

8

Retaining Ring RR

Figure 15

O-ring

6

Vibration

Dampner

M

Figure 16

Gland

Drive Ring

1B

Vibration

Dampener

M2

O-ring

P

1 2 3 4 5 6 7 8 9 10 11 12

Kommentare zu diesen Handbüchern

Keine Kommentare