Flowserve Seal Support Reservoir Bedienungsanleitung PDF herunterladen (Seite 1)

Experience In Motion

Installation

Instructions

Seal Support Reservoir

Flowserve seal support system for dual

unpressurized and dual pressurized operation

1 2 3 4 5 6 7 8

Inhaltsverzeichnis

Seite 1 - Instructions

Experience In MotionInstallation InstructionsSeal Support ReservoirFlowserve seal support system for dual unpressurized and dual pressurized operation

Seite 2 - Support System Descriptions

IntroductionThis manual covers the installation and operation of Flowserve Seal Support Systems for dual unpressurized (API Plan 52/ANSI Plan 7352) an

Seite 3 - Plan 53C/ANSI Plan 7353C

3Dual Inside Seal with Induced Circulation Through Supply Tank with Cooling Coil Figure 1Plan 53A/ANSI Plan 7353APressure so

Seite 4 - API Plan 52/ANSI Plan 7352

API Plan 52/ANSI Plan 7252 for dual unpressurized sealsAn API Plan 52/ANSI Plan 7352 is an unpressurized dual seal system which is used in services w

Seite 5

5Buffer/Barrier Fluid SelectionThe following should be considered when selecting a barrier/buffer uid:• Compatibility of the uid with the process

Seite 6

Fluid volatility and toxicity of the uid must be such that the leakage to the atmosphere or disposal does not impose an environmental problem.1. Th

Seite 7 - Maintenance

9. If the system is equipped with a weld pad level gauge the bolts on the cover should be retorqued to 20 ft/lbs. (Tighten in 5 ft/lb increments

Seite 8 - TO REORDER REFER TO

FIS123eng REV 11/08 Printed in USAﬂowserve.comTo ﬁnd your local Flowserve representativeand ﬁnd out more about Flowserve Corporation, visit www.ﬂowser